About Sympafix
The best quality at the best price
High quality requirements apply to constructive anchors for concrete. Rightly so. A secure, ETA-certified anchorage is of decisive importance for the structural integrity. That is why there are strict European EOTA guidelines and test protocols for constructive anchors. If an anchor passes this test protocol, a European ETA approval can be granted.
But such a test protocol is difficult and time-consuming. Anchors in the highest ETA class (ETA-1) are therefore scarce. And that drives up the price. Take the traditional push-through anchor. It is available with an ETA-1 approval (for example the Fischer® FBN or the Hilti® HSA) and an ETA-7 approval (respectively the FAZ and HST). For the first you pay up to 70% more, even if the manufacturing price is hardly higher.
Sympafix does not participate in that. We believe that not only quality, but also a fair price is important. Our anchors meet the same high EOTA requirements, but are based on cost price, not on scarcity.
You can download the Sympafix calculation software for FREE here . This allows you to quickly make constructive calculations of anchors in concrete, taking into account concrete hardness, edge distances and the like.
Our partner dealers always have a large stock. The central Sympafix warehouse in Alkmaar supplies our partner dealers in the Netherlands and abroad on a daily basis. With an average of more than 1000 pallets with anchors in stock, Sympafix has achieved a delivery rate of more than 95% over the past 5 years.
Braid suitable for almost all brands of binding machines, an ETA-approved concrete screw with a placement depth of only 28 mm, a nail gun with which insulation is attached directly to concrete without drilling. This is just a small selection of the Sympafix innovations.
What Sympafix stands for
Our specializations:
- Steel anchors
- Chemical anchors
- Shot Mount
- braiding machines.
Safety. Our anchors meet the toughest ETA approvals. Both in the compression and tensile zone of concrete, or even in seismic applications. Challenging environmental factors are also covered in our certificates: very heavy loads, water-filled boreholes, air or diamond drilled holes, processing at or exposure to high or very low temperatures.
Innovative solutions. Our patented braiding wire fits in almost all popular braiding machines and saves up to 15% in plastic waste. The injection anchor UC200-PLUS Ultrabond has an unprecedented high bond strength. The 6x28mm concrete screw allows an ETA-approved fastening, without encountering reinforcement when drilling.
Own R&D. Our own state-of-the-art anchor laboratory is fully equipped for performing ETA tests in-house (the only one in the Netherlands)
Speed. Lightning-fast deliveries from our own warehouse in the Netherlands, and fast, tailor-made technical advice
Fair pricing. A competitive pricing that in turn enables you to calculate more sharply.
Do you want to work for a young, dynamic and fast-growing company? Send your CV and motivation to careers@sympafix.com.
For all your technical, logistical and other questions you can reach us on +31 (0)72 3030 500 or via support@sympafix.com.
Sympafix BV is a young company in structural anchoring for the construction industry, with more than 100 years of experience.
