Shopping cart0
Your shopping cart
Total:
€
0,00
No products in the shopping cart
CHEMICAL ANCHORS
Filter
Filter
CHEMICAL ANCHORS
4Features:
- UC200-PLUS Ultrabond: suitable for very high loads, low installation depths or reduced edge distances due to extreme bond strength
- C100-PLUS: universal high-performance anchor suitable for all possible applications in both concrete and stone
- M50-PLUS: cost-effective anchor for common, less demanding applications
- X150-PLUS: for diamond-drilled holes or very deep bonds
- Chemical anchors are stress-free and can therefore be placed close to the edge and close to each other
- On each tube of a chemical anchor there is a table with the gel and setting time. After injection, insert the steel within the gel time, and until the setting time is over, do not load the anchor
- When using a new tube, do not use the first 10cm or three pumps of glue, because the two components are not yet properly mixed.
- When using chemical anchors, the drill hole is watertight after curing
Advantages:
- 4 formulations; there is the right and most cost-effective solution for all applications
- All Sympafix chemical anchors are approved for use in water-filled boreholes
- All Sympafix anchors have one or more ETA approvals
- Chemical anchors are suitable for heavy loads, heavier than most mechanical anchors
- Chemical anchors are suitable for small edge distances and relatively 'fresh' concrete (expansion-pressure-free fixing)
- Chemical anchors are suitable for all diameters and drilling depths
- All formulations are available for use in most common spray guns
- For the standard caulking gun, cartridges are available in the formulations UC200-PLUS, C100-PLUS and M50-PLUS
- Pure epoxy X150-PLUS cartridges suitable for various Hilti® spray guns
Sympafix BV is a young company in structural anchoring for the construction industry, with more than 100 years of experience.
