Chemical anchor hybrid mortar C200-PLUS ULTRABOND 420ML
Documents
Chemical anchor hybrid mortar C200-PLUS ULTRABOND 420ML
€ 19,99
In stock
Per ve en excl. btw
Characteristics:
• ETA approved for applications under seismic action, category C1 and category C2
• ETA Option 1 approval for use of threaded rods and rebar in cracked and uncracked concrete
• ETA TRO23 approval for post installed rebar applications
• Approved in hammerdrilled, airdrilled and hollow drill bit holes
• ETA approved for overhead installation and waterfilled holes
Advantages:
- Spectacular bond strengths up to 81% increase in cracked and 127% in noncracked concrete compared to C100-PLUS
- Approved for shallow as well as (very) deep drillholes
- Approved for close edge distances
- Approved for the use in three temperature ranges, up to 160°C
- Fast curing
- Approved for use with threaded rods in all common steel classes
- No drillhole cleansing required when using hollow drillbits.
Product description:
- ETA-1 approval for reinforcement and threaded rods in cracked and uncracked concrete with exceptionally high bond strengths ETA-1 approval for seismic applications category C1 and C2 ETA TR023 approval for post-installation of reinforcement ETA approval for applications in hammer, air and hollow drilled holes ETA approved for applications in concrete from -5 degrees Celsius ETA approved for overhead applications, water-filled drill holes and very high temperatures ETA approved for very shallow (4x anchor diameter) and very deep (20x anchor diameter) bonds Suitable for extreme loads ETA approved for very small edge and centre-to-centre distances Short curing time 120 minutes fire approval Suitable for use in closed spaces due to low emission values (A+ certification) ETA approved in combination with all common steel types: 4.8, 5.8, 8.8, stainless steel and HCR steel Fast structural calculations possible with the free Sympafix DesignFix software
Product data:
- Volume: 420 ml ml
- Included: mengtuit 1 piece
- Length x width x height (box): 70x70x215 mm
- Box contents: 1 st
- Carton contents: 15 st
- Weight per box: 830 gram
- Basic material: Cracked concrete (tensile zone), Non-cracked concrete (compression zone), Channel plate
- Borehole cleaning: Automatic cleaning using hollow drill, Manual cleaning
- ETA approval and certifications: ETA for concrete, Seismic approval C1, Seismic approval C2, Fire approval for 90 minutes, Fire approval for 120 minutes, A+ certificate for processing in enclosed space, Suffered Certificate
C200-PLUS Ultrabond; the strongest mortar on the market: unbeatable bond strengths with fire approval and ETA-1 approval for applications in both the tension and compression zone of concrete including seismic applications in both categories C1 and C2. ETA approval also valid below freezing point, for water-filled boreholes, for almost all steel qualities, for overhead applications, for very small concrete thicknesses and centre-to-centre and edge distances. Also approved for bonding reinforcement at great depths when expanding concrete structures (ETA TR023 certification). When using a hollow drill with dust extraction, borehole cleaning may be omitted without losing the approval, which can mean enormous savings in labour time
Sympafix BV is a young company in structural anchoring for the construction industry, with more than 100 years of experience.
