Shopping cart0
Your shopping cart
Total:
€
0,00
No products in the shopping cart
Concrete screws SB-A4 6/10x60
Videos
Documents
Downloads
Concrete screws SB-A4 6/10x60
€ 466,90
In stock
Per ve en excl. btw
€
466,90 Packing unit
50 pieces
Characteristics:
- One piece heavy duty concrete anchor
- Diameter and length identification on the head
- Through fixing
- Made from A4 stainless steel suitable for outside use
- ETA-1 approval for cracked and uncracked concrete
Advantages:
- Quick installation; drill and drive!
- Performed washered head for better holding strength
- Removable and reusable
- Aesthetic appearance
- Suitable for close edge installation
- A4 stainless steel for outside use and moist conditions
Product description:
- Suitable for use in cracked and uncracked concrete, masonry, solid stone and sand-lime brick Also available in galvanised, countersunk head and flat dome head versions Also available with M8 / M10 internal thread with ETA approval for applications in cracked and uncracked concrete and hollow-core slab Diameter and anchor length markings on the head for easy inspection after installation Virtually stress-free: suitable for very small edge and HOH distances Integrated washer with counter-threaded serrated profile for better securing of the workpiece Sawtooth profile on the gradually increasing pitch for quick installation, even in very hard concrete Completely removable and limited reusable in the case of temporary anchoring Aesthetic finish
Product data:
- Drill diameter: 10 mm
- Length under head: 120 mm
- Diameter: 12 mm
- Max. clamp thickness / useful length / Tfix: 65 mm
- Spanner size: 15 mm
- Washer diameter: 23 mm
- Length x width x height (box): 125x120x78 mm
- Box contents: 50 st
- Carton contents: 200 st
- Number of boxes per master carton: 4 st
- Weight per box: 1690 gram
- Basic material: Cracked concrete (tensile zone), Non-cracked concrete (compression zone), aerated concrete, Channel plate, Limestone / masonry
- Application: General Confirmations
- ETA approval and certifications: ETA-1 approval for tensile and compression zone applications, ETA for concrete, Fire approval for 90 minutes, Fire approval for 120 minutes
- Material / corrosion: Stainless steel A4
- Product type: Concrete screws
- Head Configuration: hexagon head
Stress-free, structural stainless steel A4 screw anchor suitable for heavy loads and small HOH and edge distances. ETA-1 certified for structural permanent fixings in both cracked and uncracked concrete (tension and compression zone). Also provided with F120 fire approval. For concrete, sand-lime brick and masonry. Integrated pressed flange with locking profile under the head. Dimensions on the top of the anchor stated for possible inspection. Attractive finish for visible work.
Sympafix BV is a young company in structural anchoring for the construction industry, with more than 100 years of experience.
