Shopping cart0
Your shopping cart
Total:
€
0,00
No products in the shopping cart
Concrete screws SB-PLUS 6x1/28DOME
Concrete screws SB-PLUS 6x1/28DOME
€ 67,76
In stock
Per ve en excl. btw
€
67,76 Packing unit
50 pieces
Characteristics:
- ETA approval for use in cracked concrete and hollow core slabs
- For hanging M8 and M10 threaded rods
- Small drill diameter compared to traditional impact anchor
Advantages:
- Up to 70% faster installation than traditional drop-in anchors
- Automatic alignment of threaded rods of equal length
- Virtually stress-free
- Significant reduction in potential installation errors
Product description:
- Double M8 / M10 internal thread with ETA approval for applications in cracked and uncracked concrete and channel slabs Suitable for concrete, solid stone and sand-lime brick Very fast installation compared to impact anchors with less effort and less risk of installation errors Virtually stress-free: suitable for very small edge and HOH distances Sawtooth profile on the gradually increasing pitch for fast installation, even in very hard concrete Completely removable and limited reusable in case of temporary anchors Aesthetic finish F120 fire approval
Product data:
- Drill diameter: 6 mm
- Length: 31 mm
- Length under head: 28 mm
- Diameter: 8 mm
- Max. clamp thickness / useful length / Tfix: 1 mm
- Cup thickness: 3
- Bit size (torx): T-30
- Box contents: 100 st
- Carton contents: 800 st
- Number of boxes per master carton: 8 st
- Basic material: Cracked concrete (tensile zone), Non-cracked concrete (compression zone), aerated concrete, Channel plate, Limestone / masonry
- Application: General Confirmations
- ETA approval and certifications: ETA for concrete, Fire approval for 90 minutes, Fire approval for 120 minutes
- Material / corrosion: Carbon steel galvanized
- Product type: Concrete screws
- Head Configuration: Dome / pan head
Stress-free, structural screw anchor suitable for heavy loads and small HOH and edge distances. For concrete, sand-lime brick and masonry. ETA approved for multiple fixings in both the tension and compression zones of concrete. With internal thread connection M8 and M10 in one internal thread. Ideally suited for the structural fixing of threaded rods for cable ducts, pipes and the like. Much lower chance of installation errors than with traditional hammer-in anchors, and considerably faster to install.
Sympafix BV is a young company in structural anchoring for the construction industry, with more than 100 years of experience.
