Shopping cart0
Your shopping cart
Total:
€
0,00
No products in the shopping cart
Galvanized shoring foot anchor SHL-PLUS-NL 18(M12)x12/88*
Galvanized shoring foot anchor SHL-PLUS-NL 18(M12)x12/88*
€ 55,62
In stock
Per ve en excl. btw
€
55,62 Packing unit
15 pieces
Characteristics:
- ETA-1 approved for cracked and uncracked concrete and seismic applications category C1 and C2
- Very high tensile and shear loads because of special geometry
- Washers with special thickness and hardness that do not deform at high loads
- Also available as bracing anchor (NL)
- F120 fire approval
Advantages:
- Because of the high load capacity, fewer fastening points are required
- Suitable for safety-relevant dynamic loads, including fatigue, seismic loads, and shock loads
- Suitable for applications with high demands on safety and load-bearing capacity, such as braces, machines, steel columns, pumps, beam supports, nuclear power plants, etc.
Product data:
- Drill diameter: 18 mm
- Length under head: 88 mm
- Max. clamp thickness / useful length / Tfix: 12 mm
- Spanner size: 19 mm
- Tightening torque: 100 Nm
- Metric thread: M12
- Basic material: Non-cracked concrete (compression zone), Channel plate
- Material / corrosion: Carbon steel galvanized
- Head Configuration: hexagon head
Safety and brace anchors for the most critical fixings in cracked and uncracked concrete. The anchors with the 'NL' addition in the name have been specially developed for fixing braces in hollow-core slabs and ribbed cassette floors and are equipped with an ISO 7094 / DIN 440 washer. Suitable for applications with high safety requirements such as braces, machines, steel columns, beam supports and for anchorages exposed to fatigue, dynamic and shock loads.
Sympafix BV is a young company in structural anchoring for the construction industry, with more than 100 years of experience.
